I got tired of my original pickups so I went and got some new ones from @BKPickups and redoing my Bass VI *one more time*. Follow this thread for updates.pic.twitter.com/n1iircREsv
Show this thread
-
It works! Haha I think now I have about 10 pickup combinations plus there’s a blend pot for the middle pickup which adds even more. BUT the problem now is I oriented the switch backwards so I have to desolder some leads to flip it and I don’t know if these weak pads can take itpic.twitter.com/7JCLBXqpsJ
Show this thread
I finally got the megaswitch rewired the correct direction, have the 2nd switch that changes the mega's layout, and the blend pot is working. Now, the new orientation of the megaswitch means I have to cut about 1/8" of wood from the side of the cavity and I don't have a dremel.
-
-
Alright a bit of file drill bit work and the cavity for the 5 way switch (10 way really) is enlarged to fit everything.pic.twitter.com/GN48jLpalA
Show this thread -
Everything all wired up, soldered, and heat shrinked and ready to fit. Works as expected….so far.pic.twitter.com/kkS8ylUKTM
Show this thread -
Pickguard on and all the electronics are working. I think I may need to shave off another bit of wood on the cavity but should work for now. Now to put the neck on and play it.pic.twitter.com/Vf8dr2gOFl
Show this thread -
And done! Beast6.10 is assembled, setup, and working exactly how I thought it would. The
@BKPickups work exactly like I wanted, with lots of response and variation in sounds. The little switch by the blade really only gives me 1 more switching option, plus blend pot.pic.twitter.com/FSIRQNFmAX
Show this thread
End of conversation
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.