Conversation

Replying to
Okay, kinda got it right, but it was a bitch to shove it in which makes me thing I didn’t do the insulation crimp right or 22awg stranded is too much. See how I had to shove it in? (the connector end has a metal tab that ideal snaps in place for a nice irreversible join.
Image
Image
Image
1
Good to know 🤣 I did try stranded 22 first, but it seemed to hard so tried 24 solid core just to get mechanics right. And yes I did use a crimping tool.
Quote Tweet
Replying to @vgr
a) you can’t crimp solid core and b) you need a proper crimping tool. it should have hardened metal guides with two layers and be matched with the size of the connector
1
1
Next, let’s try connecting it up. The white wire is the (apparently illegal) illegal 24 awg solid core crimp, a C-. The green is the 22 awg stranded core legal but crappy (D-) crimp. Will it connect? Will current flow?
Image
1
Incidentally. I bought a box of the wrong size JSTs so I have a bunch to practice on and ruin. My project needs 1mm/1.5mm ZH/SH connectors and 2.54 for standard pcb/breadboard connections. These 2mm PH are no immediate use so gonna make a bunch of useless practice cables.
Image
1
1
Aside: pre-crimped wires are a thing and that’s what I plan to use where possible. I need to learn manual process though, to do some components that came with uncrimped wires already attached.
1
1
Kinda hacked it by recrimping using the 24 AWG die even though I’m using 22 AWG wire. The connector can handle 22-28 supposedly but since 22 is the biggest maybe it’s harder?
Image
Image
1
The hardest part of this is not knowing whether I'm doing something wrong, or whether the tool or materials are wrong. Gonna have to try a couple more times with variations to see if I can get one to go exactly right. Filming me doing the actual crimping will be tough.
1
4
All my crimps are bad. Gonna have to practice a few dozen times I suspect, before I get the first perfect crimp.
Image
Image
Image
2
1
It’s a delicate, irreversible operation the wire goes between the wings. Bare in the middle, insulation into larger outer wings. Regular and microscope views.
Image
Image
1
Screwed up another pair. In first I’ve pushed the insulated part in too far. Second, strands are loose from bare crimp part. Didn’t screw up the lock tab at least. Still doesn’t fit housing right. grrrr. Giving up for the day.
Image
Image
2
1