@Meaningness I recall you were interested in my fan adventures as an example of real-world task intelligence. You may like this evolving Chapter 2, two years later, trying to uninstall the damn fan 
-
-
Show this threadThanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
I can see you tried. I would try s long driver with a slightly larger bit. And give it a good whack.
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
Have you tried removing the arm the blade is screwed to from the rotor? This would allow to get optimal geometry and pressure with your screwdriver to remove the problem screw. The arm should be held on with 2 screws/bolts from above directly into the rotor hub.
-
that's the problem I'm trying to solve! the screw holds the arm to the hub
- Show replies
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.
