@marcan42 What was the reason to use USB transceiver USB3343 in OpenVizsla ? Is it to avoid noise or loading of the USB lines ? I have seen a logic analyser directly probing the USB lines. https://youtu.be/4FOkJLp_PUw CC:@tmbinc
-
High-speed support.
To elaborate: you need a very carefully designed input stage if you want to probe high-speed USB, and a logic analyzer with a very high input bandwidth. Or you could just use a PHY which does all of that for you. IIRC OV does have an optional direct tap on the signal lines too.
-
-
Thanks to both for the clarification
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.