You can add location information to your Tweets, such as your city or precise location, from the web and via third-party applications. You always have the option to delete your Tweet location history. Learn more
However, when *most* people say RS-485 they mean "RS-232 style UART over RS-485". Glasgow already has a UART applet. So assuming you mean *that*: 1) If you need "true" RS-485, you need an external transceiver, and then the UART applet needs a minor change to add a TX enable pin.
2) if you just need to talk to "some" RS-485 device or a few in a controlled situation, you could further extend the UART applet to fake a RS-485 bus with two single-ended I/Os, assuming your grounds are common and sane, and get away without using a transceiver.
This will work because RS-485 is usually implemented using 0V/5V single-ended signal levels, and Glasgow supports 5V logic (that's in fact the maximum supported I/O voltage).
I’m principally interested in interacting with / observing SIA OSDP which is implemented as a serial 2 wire RS485 multi drop bus.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.
