I had been putting off the screen replacement of my ThinkPad X230 because laptops... and I just realized it's 6 screws. That's it. Took 10 minutes.
Show this thread
-
How would you approach a SD card reader replacement? I have a donor board with the reader, but the bottom is made of plastic and melted easily when I removed the broken reader from my t440p with hot air.
By reader you mean the socket itself? You'd need a proper temp controlled reflow oven to not melt it. Alternatively, if you can blast the bottom of the donor board with heat (if you don't mind destroying it otherwise), that should work.
-
-
I only have a cheap hot air station and the donor board is defective anyway so I will try the bottom heating approach, thanks for the answer.
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.