@marcan42 You may be sick of these questions.... but here goes. Have a factory 9211-8i sbr or associated low level files to restore a bricked unit? I can't seem to locate these anywhere
https://github.com/marcan/lsirec/blob/master/sample_sbr/sbr_sas9211-8i_itir.cfg … You can flash that with lsirec (after building it with sbrtool) as long as the PCI device is visible to the OS.
-
-
I was attempting that without much success. im about to pass out. I did build one with sbrtool and even added my sas addr as you have in the note on your github <3 but it wont let me host boot any firmware. its being dodgy, but also that motherboard has IOMUU devices
-
You need to disable the IOMMU (e.g. by booting with the appropriate kernel option). It won't ever work if the card is behind an IOMMU.
- Show replies
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.