Introducing a new standard for LED indicator brightness: your LED should be bright enough to be clearly visible when illuminated by a FireSword V in high mode at 1m distance. And NO BRIGHTER.pic.twitter.com/81XcBo2yir
Show this thread
-
Lower exposure with the FireSword, they're clearly visible.pic.twitter.com/Z1ZToZibr9
Show this thread
-
-
Note that that last photo isn't in the dark, it's with normal room lighting and lowered exposure. They definitely aren't *dim*. Here's an actual shot in the dark and one in normal lighting and exposure. The camera exaggerates them a bit though.pic.twitter.com/SSpvkfE5Xe
Show this thread -
For reference, when I started they were 10 times brighter or so and hurt my eyes *even through a layer of tape*.
Show this thread -
Side by side with a revB. MY EYES! THE GOGGLES DO NOTHING!pic.twitter.com/n2g8UyBfMu
Show this thread -
These are the resistor values I ended up with. Yes, the currents are in microamps.pic.twitter.com/3XE2r5rlib
Show this thread
End of conversation
New conversation -
-
-
!!! Are the user LEDs trans?
-
Yes, yes they are.
End of conversation
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.