PSA PSA PSA: if you use LVM with USB drives you will get absolutely *abysmal* performance by default (especially on HDDs). You must use `pvcreate --dataalignment 2048s` to fix it. Fix requires re-creating PV and copying all data.
All the data is misaligned, the only fix is to copy it all. You could conceivably do an in-place move but I'm not aware of any tool that can do that.
-
-
Would probably have to copy the bits to ram, and do it at a direct level. Writing bit by bit in the direction it needs shifted. Some esoteric data/drive manipulation right there. Just a thought.
-
Well, you can literally dd to/from the same drive with the offset, that should work as long as the new offset is lower, but then you need to fix the metadata/header to reflect the new location of the data. And if it dies in the middle of the move good luck recovering.
- Show replies
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.