Rezultati pretraživanja
  1. 3. velj

    The $100 donor sheetmetal for got the vital areas dusted off this afternoon by Kurt Eberwein of Southern Maryland Sandblasting, before I cut them out this evening. Josh and I will be…

  2. 31. sij

    The big 7.3L is eating up valuable legroom in the tight confines of . Whether we do it now or later, we are gonna want to stretch the cab a little bit to get that…

  3. 20. sij

    Josh, Don, and I swapped the floor into 's '57 cab today. It took plenty of cutting and welding, but the Chevy floor was too high in the front, and we are using the Ford seat…

  4. 14. sij

    's cab mounts are fabbed! I cut off and reused the rear cab mounts by shortening them, raising them up, and moving them forward, then welding them back on. It's just sitting on them for now,…

  5. 13. sij

    Don and I made a little more progress today on . We have the '57 cab sitting down over the chassis, and the Ford firewall trimmed to fit. Now begins the tedious process of fabbing cab…

Čini se da učitavanje traje već neko vrijeme.

Twitter je možda preopterećen ili ima kratkotrajnih poteškoća u radu. Pokušajte ponovno ili potražite dodatne informacije u odjeljku Status Twittera.