Media
- Tweets
- Tweets & replies
- Media, current page.
-
Here's the current set. From top left, clockwise: Drop ALT High Profile (Halo True), Tofu65 (C3 Tangerine), Vortex Race 3 (Cherry Red).pic.twitter.com/1sNVaAUMw2
-
Then after losing a bunch of tiny screws we finished. Same shot as opening tweet of the finished board, other pic is one I didn't have a tweet for.pic.twitter.com/048Ka78vam
Show this thread -
Some quick work with the iron and a pump got us room. Phew. Now on to a bit of foam in the base of the case to aid with acoustics.pic.twitter.com/j3jL4qJ4jA
Show this thread -
Upon adding key caps I realized that the foot of a stabilizer had wiggled loose. I had to desolder 1/3rd of the switches so I could pull the plate up enough to reposition. I was cursing heavily here.pic.twitter.com/QdoNs6P0f7
Show this thread -
With the soldering done, I reveled in my accomplishment. You might notice the return key's left stabilizer looks a little out of place here.pic.twitter.com/1ayhwbq9Mo
Show this thread -
Be sure and test-fit the bottom row! I had some minor misalignment that I caught before soldering. But missed some stuff on the return key.pic.twitter.com/1dirtsLsBV
Show this thread -
Here's the spread. I used PTFE lube on the stabilizers along with dielectric grease for the wires. I used bandaids to soften the bottom out after clipping off the little feet in each stab. They are Cherry clip-ons.pic.twitter.com/WZm0mV1NUo
Show this thread -
The switches are C3 Tangerines, light green stem. It's a 62g smooth, linear switch. I opted to not lube them because I don't have a switch opener yet and because they say they are smooth. Also they are orange af.pic.twitter.com/PayLEHkGzM
Show this thread -
This weekend I built a keyboard! It's a Tofu65 case and KBD67v2 PCB. It's not a hotswap, so soldering the switches and such is required. Keycaps are GMK Metropolis. Here's the finished product:pic.twitter.com/WtYR3XDGJ1
Show this thread -
-
-
-
First round of papers as I start research for 2020 talks:pic.twitter.com/ifDoYbMlpV
-
Good morning, my talk from
#kubecon, No-nonsense Observability Improvement, is now online:https://www.youtube.com/watch?v=HmKAjIlImcU … -
-
I submitted a talk to
@SREcon West today. You should submit too, the CFP closes at 23:59 UTC today!pic.twitter.com/y3T9lUsQS8
-
Oh, got another one that is hitting me hard (with Norman’s excellent book in attendance)pic.twitter.com/xtAfQu0tIr
Show this thread -
-
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.