Chris McCord

@chris_mccord

Creator of the Phoenix Framework, Author of Metaprogramming Elixir, Programmer at , builder of things

Vrijeme pridruživanja: veljača 2011.

Medijski sadržaj

  1. 6. sij

    and the results :)

    Prikaži ovu nit
  2. 6. sij

    I fired the sawmill back up to cut my last and largest log. This one had some neat spalting. Half the work was simply getting the log into place. Here's an hour of work condensed to 1 min to lift the log 2ft over and half a foot up:

    Prikaži ovu nit
  3. 9. ruj 2019.
  4. 9. ruj 2019.

    My latest shop project: Brass hammer/mallet. Brass, nylon, and rubber were machined on the drill press. Handle was milled from a piece of cherry firewood. I prefer a heavier mallet, so this is ready for a life-time of chisel work and coaxing joints together

  5. 29. kol 2019.

    phoenix-core member takes the stage to Demystify Phoenix LiveView

  6. 29. kol 2019.

    Find me at for Phoenix stickers!

  7. 18. lip 2019.
    Odgovor korisniku/ci

    There’s a reason I built this which puts me 5 feet from the saw vs

  8. 17. lip 2019.
    Odgovor korisniku/ci

    Based largely on Izzy Swan’s design

  9. 16. lip 2019.
    Prikaži ovu nit
  10. 16. lip 2019.

    Chainsaw mill round two with a bigger log was a success! I was able to pul the log into place with a rope and lift it up with some dolly maneuvering. Cut time was was 10 minutes, so here’s sped up 10x:

    Prikaži ovu nit
  11. 3. lip 2019.

    First run of the chainsaw mill on a smaller test log. It works! My throttle cable hopped off a couple times so still some issues to debug, but it worked way better with a regular chain that I thought it would. Next up is the larger logs with a rip chain

  12. 27. svi 2019.

    It’s finished! Next step is figuring out how to get the logs on the base without a winch

  13. 25. svi 2019.

    Weekend project- chainsaw sawmill. I’m going attempt to slab up a white oak that fell in my yard. Next step is building the track

  14. 23. svi 2019.
  15. 19. tra 2019.

    My Phoenix LiveView keynote from ElixirConfEU is out detailing the LiveView life-cycle and how we achieve our diffing optimizations with ’s work on the LiveEEx engine:

  16. 19. stu 2018.

    I just finished this masterpiece

  17. 4. stu 2018.

    I made some Phoenix LiveView progress this weekend. I think we have a good model for nested, dynamic live views, as well as error isolation and recovery. Here's a sneak peak! note: this is *not* localhost. Deployed to remote server, and interaction is buttery smooth:

  18. 15. lis 2018.

    I finally had some time to tinker in the workshop again. Latest projects include a crosscut sled for the table saw and a new clamp rack

  19. 10. ruj 2018.

    Uh oh, time to go implement something crazy :D

  20. 6. ruj 2018.

    . kicks off Elixirconf

Čini se da učitavanje traje već neko vrijeme.

Twitter je možda preopterećen ili ima kratkotrajnih poteškoća u radu. Pokušajte ponovno ili potražite dodatne informacije u odjeljku Status Twittera.

    Možda bi vam se svidjelo i ovo:

    ·