Chrissy

@chris_jh

Software engineer by trade. I like retro things such as the sega megadrive, c64, amiga....

UK
Vrijeme pridruživanja: svibanj 2008.

Tweetovi

Blokirali ste korisnika/cu @chris_jh

Jeste li sigurni da želite vidjeti te tweetove? Time nećete deblokirati korisnika/cu @chris_jh

  1. proslijedio/la je Tweet
    prije 9 sati

    Tonights video is Pacland on many many formats. Ever wanted to see an Atari Lynx LCD screen in HD on your 42 inch LCD? Well now you can thanks to !

    Poništi
  2. proslijedio/la je Tweet
    5. velj

    Tommorrow night on ChinnyVision, Pacland! Thanks to and for making this possible. We have a 9 formats including PC Engine, Atari Lynx and Sharp X68000 on real hardware. Oh and all the usual UK suspects!

    Poništi
  3. 2. velj

    Well done V1.0 of the Open Laser Mouse for the Amiga. PCB's ordered. I may rob bits from the Bluepill board and install on here 😂 In theory should also work with the ST just need to change the pin connection around in software for the XA, XB, YA, YB.

    Poništi
  4. 1. velj
    Prikaži ovu nit
    Poništi
  5. 1. velj

    Currently messing with making an open laser mouse for the amiga tank mouse. Using an STM32F103 (bluepill) Arduino IDE and the ADNS 9800 sensor. Seems to work 😄

    Prikaži ovu nit
    Poništi
  6. proslijedio/la je Tweet
    30. sij
    Poništi
  7. 18. sij

    New addition a very grotty/filthy c128 😂 will be cleaned one day 🤣

    Poništi
  8. 16. sij
    Poništi
  9. 14. sij
    Poništi
  10. 12. sij

    Here is direct capture (via HDMI adapter). Not sure what twitter would do to the image 😂

    Prikaži ovu nit
    Poništi
  11. 12. sij

    Here is what a straight vga connections looks like

    Prikaži ovu nit
    Poništi
  12. 12. sij

    O and i have the vga output going through a cheap £5 vga to hdmi too 😂🤣

    Prikaži ovu nit
    Poništi
  13. 12. sij

    Open source fpga flickerfixer for the A500 is amazing so far. Using the DE10 lite and an adapter board to get the signals from denise produces the most clear image from the amiga. 😄 Warning this is still in development and a work in progress.

    Prikaži ovu nit
    Poništi
  14. proslijedio/la je Tweet
    5. sij

    I'm auctioning off my pride and joy - my Microbee Premium Plus. Proceeds will go to NSW RFS and my old brigade - Cambewarra. *PLEASE* RT, Share, etc and help me raise some much needed funds.

    Prikaži ovu nit
    Poništi
  15. 3. sij

    i also made the Mine Storm overlay 😄

    Prikaži ovu nit
    Poništi
  16. 3. sij

    *with

    Prikaži ovu nit
    Poništi
  17. 3. sij

    My vectrex didn’t come if a joystick, looked on thingiverse and someone made a replacement \o/. Just need a curly cable and to to print a longer stick

    Prikaži ovu nit
    Poništi
  18. 3. sij

    Well put belt in and caps on disk drive Err 21 and 22 😆

    Prikaži ovu nit
    Poništi
  19. proslijedio/la je Tweet
    29. pro 2019.

    Help Dr. A to 15k. If you're not a subscriber then do yourself a favour - hundreds of great videos to enjoy -

    Poništi
  20. 25. pro 2019.

    From my mum and dad, i made the overlay. needs a little bit of attention, cartridge slot needs a clean and the picture is a little wobbly.

    Poništi

Čini se da učitavanje traje već neko vrijeme.

Twitter je možda preopterećen ili ima kratkotrajnih poteškoća u radu. Pokušajte ponovno ili potražite dodatne informacije u odjeljku Status Twittera.

    Možda bi vam se svidjelo i ovo:

    ·