Firmware 4.03 that adds CD-R support to SEGA NAOMI DIMM boards is tested and safe to flash, you can get it here: https://mega.nz/file/Nx83gKpR#J-PhRFJLe0PhFCske6Z6ZFE-vOJu3NJ5RilBqvp4U_g …
-
Any videos of the whole process end to end? How to flash, How to burn the CDR, jumper settings...ect?
This is by no means a guide, but contains some of the cryptic scene history on this specific firmware mod. It has been kept secret / held under wraps for quite some time. We did a write up about 10 months ago on the subject.https://github.com/ArcadeHustle/Naomi_DIMM_CDR_boot …
-
-
I wish this was a patched 4.02 fw. I have a dimm (NOT netdim) that was upgraded via a bios chip swap for CF. BTW, CF is terrible! Finding the correct cards is a pain and its very unreliable, games only load sometimes and the SCSI cable needs to be unplugged between loads.
-
My firmware IS a patched 4.02 (4.03 is based on it)https://github.com/mathieulh/SEGA_DIMM_CD-R …
End of conversation
New conversation -
-
-
I guess I need to dig out my GD-ROM and see if I can get it and this working.
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.