Almost! +5V to EA will simply disable the internal ROM, it won't put the chip into programming/verify mode. For that you'll need to supply EA with anything from +7V to +23V, depending on the part. Word is +23V is for EPROM parts, +7V to +10V for mask (which these are).
-
-
Tämä twiitti ei ole saatavilla.
-
Tämä twiitti ei ole saatavilla.
- Näytä vastaukset
-
Lataaminen näyttää kestävän hetken.
Twitter saattaa olla ruuhkautunut tai ongelma on muuten hetkellinen. Yritä uudelleen tai käy Twitterin tilasivulla saadaksesi lisätietoja.