On one hand, Nintendo fans would probably lose their minds if they only knew that I'm actively buying Nintendo Game & Watch handhelds to ostensibly have their circuit boards hacked apart with a saw and then boiled in nitric acid.
Näytä tämä ketju
-
- This also only really applies if the MCU is in a proper package, versus the silicon die being bonded directly to the PCB and dotted with epoxy. - In these cases, once the silicon die is exposed and cleaned with Whink, it's photographed under a microscope + images stitched.
- The stitched microscope photos have bits that can usually be identified visually (1st pic), though you need to know how words are decoded from the bits. - Unfortunately, sometimes the cheaper handhelds turn out to be ASICs, not MCUs, which aren't as easily emulated (2nd pic).pic.twitter.com/oVDUwmcdQY
-
-
Lastly, even if it turns out not to use a programmed part, and is just a state machine in an ASIC, having hi-res photos of the chip die is still useful long-term, as a dedicated person could opt to reverse-engineer the circuit itself and emulate that with MAME's netlist system.
-
Thanks for the info, I’ll have to start reading that forum thread too. Very interesting!
Keskustelun loppu
Uusi keskustelu -
Lataaminen näyttää kestävän hetken.
Twitter saattaa olla ruuhkautunut tai ongelma on muuten hetkellinen. Yritä uudelleen tai käy Twitterin tilasivulla saadaksesi lisätietoja.