Voit lisätä twiitteihisi sijainnin, esimerkiksi kaupungin tai tarkemman paikan, verkosta ja kolmannen osapuolen sovellusten kautta. Halutessasi voit poistaa twiittisi sijaintihistorian myöhemmin. Lue lisää
Ground loop. Put some ferric chokes on the USB cable or invest in a ground loop isolator.
My understanding is that a ground loop induces hum at the line frequency, not roughly the 1kHz "beeping" that is present in the WAV that I posted. Still, I just double-checked my setup. My router was on a different mains socket. Switched it to the same power bar. Same issue.
To be clear, the mic isn't externally-powered, and at the moment, everything in my A/V setup is hanging off the same 6-socket power strip.
It can also be digital interference leaking onto the audio circuits through the USB cable. I had a noisy monitor way back that did that and I tried a USB cable with no choke and one with and it reduced it significantly, My rig has to be split over two different gangs and the
there's this fun thing about USB being poorly designed and switching to and from an unbalanced state one every 1ms (hence 1kHz ground loop), and I came across this thread while searching for the one where I learned this, heh it's only a problem for D+/D-, so USB3 is unaffected
can't find it but this is close enoughhttps://twitter.com/marcan42/status/1301373089658200064 …
Twitter saattaa olla ruuhkautunut tai ongelma on muuten hetkellinen. Yritä uudelleen tai käy Twitterin tilasivulla saadaksesi lisätietoja.
