Hey @DizzyTV do you still have your removable disk from the Paintbox? I think we found it was a CDC drive?
-
-
Vastauksena käyttäjille @DextersTechLab, @Stephen_Neal ja
I have what we used to call a 'Winchester' drive. Its huge, I think it has about 100mb memory.
1 vastaus 0 uudelleentwiittausta 1 tykkäys -
Vastauksena käyttäjille @DizzyTV, @Stephen_Neal ja
Yea found it, it's the CDC 9710. Does this look familiar
@Stephen_Neal ?pic.twitter.com/DKNKsfkciU
5 vastausta 0 uudelleentwiittausta 3 tykkäystä -
1 vastaus 0 uudelleentwiittausta 3 tykkäystä -
Vastauksena käyttäjille @DizzyTV, @DextersTechLab ja
It'd be worth asking on http://vcfed.org/forum or Classiccmp. Someone probably has one of those CDC drives kicking around.
1 vastaus 0 uudelleentwiittausta 0 tykkäystä -
Would be fun to try and recover the images, we would need a working emulator and some way to connect it to the real world disk drive though! Could be somewhat challenging!!
2 vastausta 0 uudelleentwiittausta 2 tykkäystä -
Vastauksena käyttäjille @DextersTechLab, @philpem ja
1/ We don't, though. We know that it's MFM written with an 8MHz bit clock, 500kHz servo clock. We know that a track begins with MFM zeroes followed by either 0x91 0x25 in MFM or 0x53 after de-MFMing.
1 vastaus 0 uudelleentwiittausta 1 tykkäys -
Vastauksena käyttäjille @TheMogMiner, @DextersTechLab ja
2/ We also know that a track ends with that same value after de-MFMing. We also live in a day and age with cheap 32-bit microcontrollers that have USB interfaces, and can run C code, and with performance that blows a Disk Sequencer Card with an Am2910 out of the water.
1 vastaus 0 uudelleentwiittausta 1 tykkäys -
Vastauksena käyttäjille @TheMogMiner, @DextersTechLab ja
Realistically what it needs is someone with both the necessary drive to sling the cartridge into, and both the hardware and software smarts to whip up a microcontroller-based solution to just step from cylinder to cylinder and head to head, dumping out the bistream.
2 vastausta 0 uudelleentwiittausta 0 tykkäystä -
Vastauksena käyttäjille @TheMogMiner, @DextersTechLab ja
Already been rawreading old MFM/RLL harddrives via PC+Arduino+oscilloscope-hackery. Tried with STM32 alone, but even at 168 MHz it's just too slow. A beefier ARM-board is already waiting for the next attempt.
2 vastausta 0 uudelleentwiittausta 4 tykkäystä
Sounds like you're exactly the person who can help us; if we can source the necessary drive box, and we can get you the drive pack, do you think it would be doable to snag a raw read?
Lataaminen näyttää kestävän hetken.
Twitter saattaa olla ruuhkautunut tai ongelma on muuten hetkellinen. Yritä uudelleen tai käy Twitterin tilasivulla saadaksesi lisätietoja.