Tweetovi

Blokirali ste korisnika/cu @SipeedIO

Jeste li sigurni da želite vidjeti te tweetove? Time nećete deblokirati korisnika/cu @SipeedIO

  1. 2. velj

    What hardware moudles for Maix Board you want in 2020? (comment if you have suggestions)

    Poništi
  2. 2. velj

    Last year, MaixPy growing from v0.1 to v0.5 Main feature: Easy to run AI model(kmodel/maixhub), Compatible with openMV, basic peripheral API. What functions you want in 2020? (comment if you have ideas)

    Poništi
  3. 1. velj

    MaixPy update flash model runner function~🥳 Now you can run much bigger model, cost about 1MB ram to run up to 16MB model! Flash runner is about 0.5X speed, and we will provide psram module to achieve 0.8~0.9X speed! Try it out:

    Poništi
  4. 31. sij

    New KPU driver (directly load from flash to KPU) test result (run same mbnet): original driver run from ram: 36ms single buf run from flash: 103ms dual buf run from flash: 69ms dual buf run from extra psram: 45ms If we put dual Flash/Psram, the result will close to ram result.

    Poništi
  5. 31. sij

    Good News: We improve the KPU driver, now K210 can run much bigger kmodel ! It is able to run up to 16MB kmodel (it means before quantize .pb file about 64MB). We will soon add this feature to MaixPy~

    Poništi
  6. 29. sij

    Maix user Li Zhirui port Linux v0.11 on K210~ Try it out:

    Poništi
  7. 28. sij

    Good News: MaixPy support new nncase & Kmodel V4 now! Kmodel V4 support more opcode, multi-output, written in C++ 17~ Try it out:

    Poništi
  8. proslijedio/la je Tweet
    26. sij

    Use GD32VF103 board as USBtoUART bridge Features: * USB CDC/ACM device with extra features. * Bridge to 2 UARTs supported. * Displays status and statistics. * 2400 ~ 4000000 Bd * Python CDC driver with examples included

    Poništi
  9. proslijedio/la je Tweet
    21. sij

    Half my Tang Nano army showing part of my internship presentation. Not enough USB-C cables in the house.

    Poništi
  10. proslijedio/la je Tweet
    19. sij

    now support board and GW1N-1 (only tested for SRAM). Happy to see this tools mentioned in !!🥳

    Poništi
  11. proslijedio/la je Tweet
    18. sij
    Poništi
  12. 18. sij

    MF0 make simple USB compute stick~ Use high speed(up to 15Mbps) usb2uart bridge chip, you can apply it into your system easily~

    Poništi
  13. 18. sij

    MF0 stack high speed uart2usb bridge chip, make simple usb compute stick~

    Prikaži ovu nit
    Poništi
  14. 18. sij

    max 15Mbps uart baud rate, dual serial2usb module in $3~

    Prikaži ovu nit
    Poništi
  15. 18. sij

    We made super high speed usb2uart module, it can be run up to 15Mbps uart baud rate, send data at 700KB/s (16KB in 23ms in the figure), rcv data at 900KB/s. It will be used as usb bridge for MF0, and may applied in Maix Cube (improve IDE image transfer speed)

    Prikaži ovu nit
    Poništi
  16. proslijedio/la je Tweet
    Odgovor korisniku/ci
    Poništi
  17. proslijedio/la je Tweet
    14. sij

    It's working! Reveal.js in Electron sending slide text or speaker notes to Arduino, which sends them to the Tang Nano via RadioHead ASK modules from NiceRF.

    Prikaži ovu nit
    Poništi
  18. 16. sij

    Minimum MF0 come back~ 2x2cm DIP8+6 AI module~

    Poništi
  19. 16. sij

    Tang Nano apply to testing jig, generate multi PWM wave~

    Poništi
  20. 15. sij

    Maix Cube with 2.5D cover board

    Poništi

Čini se da učitavanje traje već neko vrijeme.

Twitter je možda preopterećen ili ima kratkotrajnih poteškoća u radu. Pokušajte ponovno ili potražite dodatne informacije u odjeljku Status Twittera.

    Možda bi vam se svidjelo i ovo:

    ·