exploded view of sketchup modelpic.twitter.com/1ZDFAl1T6H
Show this thread
-
Maybe I should make a papercraft 1/4 scale model to make sure the whole design works
Show this thread
on the other hand, those double rabbets might be hell to model at that scale. the good thing about the frame idea is that if I can get four boards across out of that 1x6, I only need about 38" of length, so I can fuck one up and still have plenty of material to do another.
-
-
so if I make that internal frame, then screw the plywood sheathing to the frame (and glue and clamp the edges as well as I can), that should be pretty solid.
Show this thread -
but I do need to redesign the removable amp/controls shelf so that it fits inside the frame
Show this thread -
oh wait, I need to move the horizontal front piece of the frame down to sit below the amp shelf, too. that simplifies the rabbets on the top front corners, also.
Show this thread -
-
…might want to put some runners along the sides, though, for the shelf to rest on, or maybe just crosspieces? need to think about that more.
Show this thread
End of conversation
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.