Not having much luck with #amiga psus! Got a new electroware one but almost every game crashes with a software failure error 00000003 or 00000004 but small epoxy job I borrowed works fine, is the electroware likely dodgy?
-
-
Als antwoord op @GamesAwful
Have you had your Amiga's capacitors done? Mine did that thanks to dogy caps, so had them replaced. Recommend
@RetroPassionUK if you do need it looking at.1 antwoord 0 retweets 1 vind-ik-leuk -
Als antwoord op @richmondmike @RetroPassionUK
Not had them done but seller may have, I’ll check.
1 antwoord 0 retweets 0 vind-ik-leuks -
-
Als antwoord op @RetroPassionUK @richmondmike
It’s a 500 modded with a gotek and a switch to swap between the gotek and the original drive
1 antwoord 0 retweets 0 vind-ik-leuks -
Als antwoord op @GamesAwful @richmondmike
Remove the DF0 switch and test again ;-)
1 antwoord 0 retweets 0 vind-ik-leuks -
Als antwoord op @RetroPassionUK @richmondmike
Not sure which is the df0, 2 switches on the gotek unit, seller said both down for gotek and both up for disk. Original big PSU worked before it went in smoke and the A600 supply works, only the Electroware one does thispic.twitter.com/GskgwBfedZ
1 antwoord 0 retweets 0 vind-ik-leuks
If that’s the case then it’s the PSU from Electroware return it :-)
-
-
Als antwoord op @RetroPassionUK @richmondmike
It’s looking that way, it’s a pain in the bum when it’s to go back to Poland though, always seems to be the things that take longest to come that don’t work lol
0 antwoorden 0 retweets 1 vind-ik-leukBedankt, Twitter gebruikt dit om je tijdlijn te verbeteren. Ongedaan makenOngedaan maken
-
Het laden lijkt wat langer te duren.
Twitter is mogelijk overbelast of ondervindt een tijdelijke onderbreking. Probeer het opnieuw of bekijk de Twitter-status voor meer informatie.