Thanks! But out of interest does the 3 way IDE cable work with the Amiga? And how do you get the card reader software onto the Amiga? I have a CD drive but I'd rather not burn CDs unnecessarily.
-
-
Als antwoord op @marsufan @thejanbeta
No not without extra hardware like a fast ATA card in the Amiga. To get the software on take out your cf card and put it in your PC and run winuae emulator :-)
2 antwoorden 0 retweets 1 vind-ik-leuk -
Maybe easier if I send you a floppy disk lol
1 antwoord 0 retweets 0 vind-ik-leuks -
Als antwoord op @RetroPassionUK
Sorry to bring this up again but would the Amiga recognise a flash card reader connected through an IDE interface without drivers? How about WinUAE?
1 antwoord 0 retweets 0 vind-ik-leuks -
Als antwoord op @marsufan
No and Winuae can mount any drive including pc drives to be avilable within Amiga workbench. cf card needs to be plugged in via pcmcia Adaptor with drivers.
1 antwoord 0 retweets 1 vind-ik-leuk -
Als antwoord op @RetroPassionUK
Thanks! Have I misunderstood the purpose of this? I thought it was for using flash cards in place of hard drives.https://www.ebay.co.uk/itm/CF-IDE-44-PIN-Adapter-2-5-IDE-Lead-for-Amiga-600-Amiga-1200/163522328423?hash=item2612b0b767:g:EuYAAOSw2TVcVgpW …
1 antwoord 0 retweets 1 vind-ik-leuk -
Als antwoord op @marsufan
Yes that is, but you need to set it up in winuae isi workbench disks or in a real Amiga :-) sorry for the confusion :-)
1 antwoord 0 retweets 1 vind-ik-leuk -
Als antwoord op @RetroPassionUK
Is setting up a flash card any different to formatting a hard drive and installing the OS after booting from the Workbench disk?
1 antwoord 0 retweets 1 vind-ik-leuk -
-
Als antwoord op @RetroPassionUK
Hi again. Do you know to what extent there are backwards compatibility issues when running A500 software on the A500+ and how to resolve them? Is the later OS the source of the problems or is it the later hardware?
1 antwoord 0 retweets 0 vind-ik-leuks
Try Relokick that will help a lot but you won’t get 100% comparability just refer back to the magazines on the day :-) 3.1 rom will help
-
-
Als antwoord op @RetroPassionUK
I was under the impression an A500 with 1.3 ROMs was the most compatible option for non-AGA games. An A500+ with 3.1 ROMs will perform as well?
1 antwoord 0 retweets 0 vind-ik-leuks -
Als antwoord op @marsufan
Yea a OCS 500 with a 1.3 is the best in compatibility for non AGA. 500 plus had a few enhanced chips which caused some issues.
0 antwoorden 0 retweets 1 vind-ik-leuk
Einde van gesprek
Nieuw gesprek -
Het laden lijkt wat langer te duren.
Twitter is mogelijk overbelast of ondervindt een tijdelijke onderbreking. Probeer het opnieuw of bekijk de Twitter-status voor meer informatie.