did more CNC work over the weekend, designing a small prototype of the spice rack I want to build depressingly, I had to name the file spice_rack_3, bc there were two other files from 2016 this time for sure, Rocky
-
-
4/ This is just a demo version to shake out the bugs. The real version will be ~ 10 x 10 grid. Will be mounted vertically, being the front surface of a shallow box that mounts on the inside of pantry door. Small pilot holes under each hole are for label holderspic.twitter.com/Hpa8JQ0S1d
Show this thread -
5/ here's the drawing for an individual cell in the grid doing all of this with http://onshape.com for CAD and kiri:moto plugin for G-coge generationspic.twitter.com/bWwXFy4NQs
Show this thread -
6/ a 3" x 3.2" grid is maybe a bit overlarge; dedicating too much space to blank wood between jars I can likely tighten up the grid a bit by removing 0.5" above each hole (label area below the hole above serves the same purpose) and maybe tighten up left-to-right spacing too
Show this thread -
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.
