2/ halp this is hatespeechhttps://twitter.com/ouranometrian/status/1462776546427506688 …
-
-
Show this thread
-
3/ On the bright side, this is the first version that: * has a "drill" stage defined * changes tools * has been emitted as G code * has been downloaded onto the CNC machine * has had the "start" button hit * had had extensive notes saved for future reference
Show this thread -
4/ This is just a demo version to shake out the bugs. The real version will be ~ 10 x 10 grid. Will be mounted vertically, being the front surface of a shallow box that mounts on the inside of pantry door. Small pilot holes under each hole are for label holderspic.twitter.com/Hpa8JQ0S1d
Show this thread -
5/ here's the drawing for an individual cell in the grid doing all of this with http://onshape.com for CAD and kiri:moto plugin for G-coge generationspic.twitter.com/bWwXFy4NQs
Show this thread -
6/ a 3" x 3.2" grid is maybe a bit overlarge; dedicating too much space to blank wood between jars I can likely tighten up the grid a bit by removing 0.5" above each hole (label area below the hole above serves the same purpose) and maybe tighten up left-to-right spacing too
Show this thread -
New conversation -
-
-
If you just name your files like spice_rack_2021-11-20 you never have to reveal how many previous iterations there are
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
Spice_rack_final Spice_rack_final_final Spice_rack_really_final
-
Spice_rack_really_final_edited
- Show replies
New conversation -
-
Show additional replies, including those that may contain offensive content
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.
