Nowhere! That's where one should use WD-40 as a lubricant! WD ("water displacement") 40 should be used to help break free stuck things, which should then be cleaned and lubricated with silicone spray or light machine oil. WD-40 is sticky and invites further contamination. >>>https://twitter.com/amelapay/status/1148700718053961730 …
-
-
good tip. new to me
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
Plastic bottle? The acetone doesn’t eat through it?
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
did not know this...
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
FWIW, mapp gas and Liquid Wrench is my go-to for frozen bolts, but ATF is great for busting loose locked up engines.
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
-
-
My primary use is as a cutting fluid to prevent galling on aluminum, but it works pretty well as an adhesive remover too.
Thanks. Twitter will use this to make your timeline better. UndoUndo
-
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.