My solder connections are literally so bad I had to decrease the baud rate from 115k to 38k.
-
-
Show this thread
-
-
So the backstory here is that I decided to upgrade the firmware on this camera. However they have two variants of the firmware for this model with the same version number. One works for newer hardware, the other older. I chose poorly.
Show this thread -
Turns out this isn’t an uncommon problem (3 years ago when it came out) and people have posted guides on how to connect to serial port headers and reflash with stable firmware.
Show this thread
End of conversation
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.