I’m... not surprised 
what you’ll need to do is see if there’s a way to instruct the cable to enter DFU. I know little of the interface but there’s a pin on the connector it uses, that if the conditions are right will cause it to enter DFU. I assume that cable should be able to
-
This Tweet is unavailable.
-
This Tweet is unavailable.
-
Er sorry, not pin 7, pin 6
-
-
SecureROM reads it from the VBUS_DETECT register in the phy, so I would assume, pretty strongly that on the VBUS ball on the A10X, but I'm not exactly sure which one it is because its not in the GPIO block and I can't twiddle it like I did for ForceDFU to find it
-
I need to get an iPad Pro board with an A10X and trace it from the TriStar to the A10X on that and see what, if anything its connected to
End of conversation
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.