I’m... not surprised 
what you’ll need to do is see if there’s a way to instruct the cable to enter DFU. I know little of the interface but there’s a pin on the connector it uses, that if the conditions are right will cause it to enter DFU. I assume that cable should be able to
-
-
I'll repeat I won't touch one, but I have reversed the mechanism they use. Pin 7 on the connector pulls device reset and asserts Force_DFU for 20ms after reset, but SecureROM requires VBUS_DETECT to allow Force_DFU and don't know how to satisfy that requirement
-
Er sorry, not pin 7, pin 6
- Show replies
New conversation -
Loading seems to be taking a while.
Twitter may be over capacity or experiencing a momentary hiccup. Try again or visit Twitter Status for more information.