ErikBussink
-
Hmmm nice Fusion IO ioDrive Duo 640 (MLC) landed on the desk this morning :-)
2:04 AM Nov 23rd
from TweetDeck
-
Fusion IO announces new ioDrive Octal drives . 8 ioDimm modules for upto 5TB and 6GB/s bandwidth, 800'000 IOPS.
2:35 AM Nov 18th
from TweetDeck
-
CrystalMark Disk performance results of an Striped volume on Fusion IO ioDrive Duo 320.
7:25 AM Nov 17th
from TweetPhoto
-
I just voted for Check it out!
7:05 AM Nov 17th
from TweetPhoto
-
Excellent performance and IOPS using a striped volume on a Fusion IO ioDrive Duo 320 (2x modules) 1.4Gb/s read.
6:54 AM Nov 17th
from TweetPhoto
-
@ Great performance and IOPS using a single module on a Fusion IO ioDrive Duo 320. (Make sure to use 64K blo
6:50 AM Nov 17th
from TweetPhoto
-
@ My FusionIO issues are linked to the software raid across the various ioDimm. The limiting factor is the CPU (Opteron 8384 @.7GHz)
9:48 AM Nov 5th
from TweetDeck
in reply to solori
-
As a VMware Distributor/Integrator we are not allowed to go to VMUG, but VMware wants us in VMware Customer Program for references? mrkt :-)
6:01 AM Nov 5th
from TweetDeck
-
@ I'm installing some benchmarking tools... Atto, HD Tune Pro, CrystalMark disk. Going to see where the issue is.
5:42 AM Nov 5th
from TweetDeck
in reply to solori
-
Bad Fusion IO implementation, 4x Fusion IO Duo 320 cards with a single W2K8 Soft RAID5 on top. In degraded mode, 400MB/s Read, 10MB/s Write
5:05 AM Nov 5th
from TweetDeck
-
HP advisory for HP Blades (BL465c, BL495) with ESX 4.0 having "System Board X ProcHot warning"
4:58 AM Nov 5th
from TweetDeck
-
Fusion IO's ioManager for the ioDrive Duo 320 lacks alerting features (smtp,wmi).Over a week of seriously degraded perf due to lack of alert
2:18 AM Nov 4th
from TweetDeck
-
Installing Supermicro SNK-P0040AP4 CPU Cooler (19.5dB @) in new workstation
1:55 AM Nov 3rd
from TweetDeck
-
@ Are both you're screens of the same size ?
12:54 AM Oct 30th
from TweetDeck
in reply to SimonLong_
-
@ Yep, the iButton : AOC-IMRRAKEY-2008-LSI for the Supermicro X8DTH-6F. A SuperQuiet workstation for the home.
8:37 AM Oct 29th
from TweetDeck
-
@ I did order the RAID5 option for the LSI Logic 2008 SAS2 Controller, so I will test it against the LSI 9260-8i SAS2 (RoC)
8:30 AM Oct 29th
from TweetDeck
in reply to solori
-
@ I was surprised by the results. The LSI Logic 2008 SAS2 controller can do Raid 1, but it's not the LSI Logic 2108 Raid-on-Chip.
8:28 AM Oct 29th
from TweetDeck
in reply to solori
-
Supermicro has a new SuperQuiet (38db) Tower chassis : SuperChassis 747TG-R1400B-SQ
7:44 AM Oct 29th
from TweetDeck
-
LSI SAS2 2008 Controller in RAID1 has a write speed of 7MB/s (2x Seagate 1.5TB ST31500341AS). Very disappointing. (Supermicro X8DTH-6F)
6:18 AM Oct 29th
from TweetDeck
-
Ordered a LSI 9260-8i SAS2 RAID card to replace the Supermicro X8DTH-6F limited embedded LSI 2008 SAS2 Controller.
6:13 AM Oct 29th
from TweetDeck
|
- Name Erik Bussink
- Location Geneva, Switzerland
- Web http://www.bussin...
- Bio Senior Virtualization Specialist.
|
